Machine Tools » Saws » Circular Saws » Germany

Building Filters

387

Used Circular Saws in Germany

  • Primus 300

    Primus 300

      Horizontal end milling machine with manual feed to machine the ends of aluminium or PVC profiles use of milling disks, cutter blocks or special shaped disks, max. Ø 300 mm Manual cutting operation via hand lever...

      Bullay, Germany
    • Primus 300PV

      Primus 300PV

        Horizontal end milling machine with manual feed to machine the ends of aluminium or PVC profiles use of milling disks, cutter blocks or special shaped disks, max. Ø 300 mm Pneumatic feed of cutter disk, hydrauli...

        Bullay, Germany
      • Pressta 5000

        Pressta 5000

          A new crimper for big sized aluminium profiles 2 universal and adjustable punching units allow a work range of the crimping point from 25 to 60 mm from the vertex of the profile Pneumatic crimping via lever syste...

          Bullay, Germany
        • FR830 EASY-TER

          FR830 EASY-TER

            Suitable for working on steel. The piece that is held by pneumatic vices which are mounted on a rotatable carrier, can be steplessly moved through a pneumatic control between -90 ° and + 90 °. Variable speed of t...

            Bullay, Germany
          • Expert

            Expert

              Base 3000 mm, with hardened guides in x-direction, 3.000 – 8.000 mm Electric device – operation via 2-hand safety control, setting mode to adjust drilling depth – key switch Drilling units with stand and linear g...

              Bullay, Germany
            • FR810

              FR810

                Suitable for working on steel and aluminum. Manual feed. Two-speed spindle by changing the position of the belt. Pneumatic copying pen in two stages. Pneumatic clamping of the spindle to the selected height. Larg...

                Bullay, Germany
              • Inclined loading magazine

                Inclined loading magazine

                  Tooth beld drive – with storages Available for following automatic cutting machines: Profilma 200, 250, 500 E Max. load 8 storages Max. square 50 x 80 mm Max. weight 3 kg / m Profile length 2.100 – 6.500 mm Pneum...

                  Bullay, Germany
                • Pressta 7000

                  Pressta 7000

                    A new crimper for medium and very big sized aluminium profiles 2 universal and adjustable punching units allow a work range of the crimping point from 25 to 60mm from the vertex of the profile Pneumatic crimping ...

                    Bullay, Germany
                  • Pressta 3000

                    Pressta 3000

                      This crimper is designed for very high and heavy profiles. Up to 5 set of knifes per corner Heavy duty hydraulic crimer 3,0 KW, 400 V, 50 Hz, Crimping power 100 KN V-stop, crimping tools and V-blocks adjustable D...

                      Bullay, Germany
                    • PE 50 m

                      PE 50 m

                        Our length measuring system PE 50 m offers an affordable, comfortable and easy to use alternative to the purely manual measuring of your profiles. The stop of the length measuring system can quickly be moved into...

                        Bullay, Germany
                      • PE 50 h

                        PE 50 h

                          The length measuring system PE 50 h can be operated with a manually operated wheel. To offer greater stability, the tiltable stop is mounted on a double arm setup. The reading of the measurement happens directly ...

                          Bullay, Germany
                        • Dyno 6

                          Dyno 6

                            Quick change tool system Hydropneumatic intensifier Foot valve operated Max. power at 10 bar = 50 KN Stroke = 37 mm Max. daylight = 200 mm Swiveling table to use tools to manufacture holes for sash bars

                            Bullay, Germany
                          • Dyno 40

                            Dyno 40

                              Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 400 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm

                              Bullay, Germany
                            • Dyno 20

                              Dyno 20

                                Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 200 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm

                                Bullay, Germany
                              • HMR 6 / 12

                                HMR 6 / 12

                                  Base with hardened guides Hydraulic device; Motor 4,0 kW, 400 V, 50 Hz Operation panel to switch on/off single or multy head mode Foot pedal controlled C-formed stand, working range – ram to back wall 120 mm Dayl...

                                  Bullay, Germany
                                2223242526

                                Overview

                                Circular saws are powerful cutting tools equipped with a toothed or abrasive disc or blade that rotates around an arbor. They are commonly used in woodworking, metalworking, and construction for making straight or angled cuts in various materials. Their portability and precision make them an essential tool for both professional contractors and DIY enthusiasts.

                                FAQ

                                What should I look for when buying a used circular saw?

                                Check the condition of the blade, motor, and overall build. Look for any signs of wear or damage, and ensure the saw operates smoothly. It's also helpful to review the saw's cutting capacity and power specifications.

                                How can I safely ship a circular saw?

                                Ensure the saw is properly packed with protective materials to prevent damage during transit. Use a sturdy box and consider removing the blade or securing it to avoid movement. Label the package as 'fragile' and use a reliable shipping service.

                                How do I maintain a circular saw?

                                Regularly clean the saw, especially the blade and motor vents. Check and replace the blade as needed and lubricate moving parts. Refer to the manufacturer's manual for specific maintenance procedures and intervals.