KILLION 1.5″ 24:1 EXTRUDER SCREW 17747
used
Killion 1.5″ 24:1 L/D single stage extruder screw6 Available
Elk Grove Village, IL
BRABENDER 3/4″ LAB EXTRUDER 18623
used
- Manufacturer: Brabender
Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...
Elk Grove Village, IL
BELLAFORM BH25-25D 25mm EXTRUDER 14768
used
Bellaform co-extrusion package consisting of the following:Bellaform model BH25-25D 25mm extruder. S/N P19-330877, 10.5 kW AC motor with tachometer and drive, 220-Volt operation. 25:1 L/D air cooled barrel with 3...
Elk Grove Village, IL
DELTAPLAST 30MM 5 HP EXTRUDER 18678
used
One {1) used Deltaplast model D30:24:R 30mm extruder. S/N WO.29:79. Having a 24:1 L/D ratio at a 40.5″ centerline height. Unit has two (2) zone electrically heated, air cooled, non-vented barrel. Hamilton gearbox...
Elk Grove Village, IL
DELTAPLAST 5 HP PEDESTAL EXTRUDER 18675
used
One (1) used 30mm Deltaplast model DVH 30.125:24 pedestal extruder. S/N WO281:1.91. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, and non-vented barrel. Radicon (David Brown)...
Elk Grove Village, IL
DAVIS STANDARD 15INDS20 1.5″ EXTRUDER 12754
used
- Manufacturer: Davis-Standard
Davis standard model 15INDS20 1.5″ extruder S/N K-9754. SO# 02359. 24:1 L/D. Powered by a fan cooled 15 HP 500-Volt 1750/2300 RPM DC motor through a 6.53:1 gearbox 152 RPM screw speed. Electrically heated and fan...
Elk Grove Village, IL
2.5″ 30:1 L/D EXTRUDER 17759
used
Unknown manufacture 2.5″ extruder, 30:1 L/D air cooled non-vented barrel at a 23.5″ centerline. Powered by a 40 HP 230/460-volt A/C motor with Teco A510 inverter. 4″ x 6″ feed throat. Unitized control panel with ...
Elk Grove Village, IL
DAVIS STANDARD 3.5″ EXTRUDER W/DUAL 17744
used
- Manufacturer: Davis-Standard
Davis Standard straw/tubing co-extrusion extrusion package manufactured 10/2012Last used on three color straws extruding two lanes of straws at one time. Extruders and controls are unitized on a single base. 460/...
Elk Grove Village, IL
GLOUCESTER 3.5″ 32:1 L/D EXTRUDER 18365
used
One (1) Used Gloucester model 35250R2 3.5″ 32:1 extruder having an electrically heated, air cooled, vented, and plugged barrel at approximately a 65″ center line height. S/N 36736/12. Barrel is set up for Contra-...
Elk Grove Village, IL
PRODEX 4.5″ 32:1 L/D EXTRUDER 18180
used
One (1) used Prodex 4.5″ 32:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel. The gearbox is a Lufkin change gear type gearbox and is direct driven in a tuck under ...
Elk Grove Village, IL
PTI 36:1 L/D 6″ EXTRUDER 18750
used
One (1) PTI model 6000 6″ 36:1 L/D extruder having an eight (8) zone electrically heated water cooled (closed loop) and vented barrel at a 64″ center-line height. Gearbox is a Flender model SZNF390 with a 15.4:1 ...
Elk Grove Village, IL
KILLION 1″ 24:1 L/D EXTRUDER 16305
used
24:1 Killion pedestal extruder. S/N N6598 with a three (3) zone electrically heated air cooled barrel. Gearbox has a reduction ratio of 30:1 and is direct driven by a 3HP 1750/2050 RPM DC motor. Barrel can be rai...
Elk Grove Village, IL
WELEX 2″ 24:1 L/D EXTRUDER 17438
used
- Manufacturer: Welex
Welex model 200-24/1, 2″ 24:1 L/D extruder with a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 50″ centerline height. Gearbox is a Koellmann Gear and is belt driven by a 20 ...
Elk Grove Village, IL
GLOUCESTER 2.5″ 32:1 L/D EXTRUDER 17690
used
Gloucester 2.5″ extruder, 32:1 L/D five (5) zone air cooled and vented barrel at a 45″ centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperature control pan...
Elk Grove Village, IL
3.5″, EXTRUDER SCREW, 30:1 L/D 14756
used
3.5″ 30:1 extruder screw barrier mid-section, Previously ran PEP material.
Elk Grove Village, IL
Tip: Enter manufacturer, model or keyword