Used Processing in Ontario, Canada

Immersion Blender

-5 Foot shaft on mixer -90 inch overall height Pneumatic lift Explosion proof

2,410 Litres stainless steel tank

-On 4 stationary legs that are adjustable, rughly 42” tall -Cone bottom with dimples -Port on very bottom is 3”, two other drains on the bottom both 2” -Tri clamp ports at the bottom side are 2” -Cone top -Man ho...

11' Pleated belt conveyor

• Manufacturer: Correa

-Shipping dimensions: 40" tall x 137" long x 18" wide -Pleated belt is 6" wide -Can be stationary or wheeled in to place -Height is adjustable -0.25 HP

Daltec Blower

• Manufacturer: Daltec

-Volt: 575 -Phase: 3 -RPM: 1735 -HP: 0.5 -The Fan body is stainless steel -HP: 2 -We have 3 in stock

Signode Power Strapping Machines

• Manufacturer: Signode

-Maximum cycle speeds vary from 575 to 1500 straps per hour -Strap feed and take -Up speed is 5.3 feet per second -230/460 V -Model number: MCD 700

168 Litres tank with mixer on the bottom

-Tank dimensions:23" heigh x 24" wide. -Over all height 44" -4 legs are 22" tall -Off spout side of bottom is 2.5" diameter -Open top with lid -Cone bottom -37 IMP gall

2 Stage high vac Airtech system

• Manufacturer: Airtech

-Rotary vane vacuum pump with booster -AC500 Booster: Weg motor has 2.2 (3.0) HP, 50HZ, 220/380 Volts, 7,81AMPS, model: 00236ET3WAL90LFF-W22 –L63 Vacuum pump motor: 3HP, 1760RPM, 230/460 Volts –Shipping dimension...

Hibon blower

• Manufacturer: Hibon

-Model 2051-HCZ -Serial 5V015-63 -230/460 volt @ 1750 rpm -3 IN STOCK

Vac-u-max motor head

• Manufacturer: VAC-U-MAX

-115 volt -Shipping dimensions:14”x14” x 13” height -Does not have filter

Steel filter housing

Shipping dimensions: Height - 10" x Width - 7" x Length - 7 1/2" Input / output - 1 1/2" (2 Of 2)

Portable Forced Air Heater

• Manufacturer: Stelpro

-Shipping dimensions: length 11" x width 11" x height 14 1/2" -Model: SCH48T -Watts: 4800/3600 -Phase: 1 -Volts: 240/208 -Hz: 60

Paddle Blender

• Manufacturer: Falk

Motor 30 HP, 550 VOLT Dimensions 58'' DIAMETER x 60'' LONG Output rpm 28 Previous use FLOORING COMPOUNDS Overall dimensions 72'' W x 96'' L x 88'' H Cubic feet total capacity ...

Cyclone dust collector vessel

-Cyclone dust collector vessel on stand -Legs 83” tall -Bottom shoot: 6” diameter -Top 2 shoots: 7” diameter -H 122” x W 49” x L 49” -Diameter of Cylinder: 24 1/2" -Height of cylinder: 40" -Height of cone: 38 1/2"

Cone Bottom Carbon Steel Hopper Tank

-Diameter: 9ft -Top opening: 36" x 36" -Two bottom openings: 20" x 20" -Length of legs: 73" or 6.1 ft -Attached to the hopper bottom is a Vibco 250 -Monitor: -Model: KA -Power: 115 V~50/60 Hz -UL listed -Total di...

Blower

-Shipping dimensions: Width 13 1/2" x Height 16 1/2" x Length 17" -HP .25 -V 200 -3 Phase -Hz - 50 / 60 -19 kg