Dynatel 2273
- Manufacturer: Dynatel
Cable Fault Locator Cal: Calibration Available | As-is: Unit Sold AS-IS
$2,410 USDFarmingdale, NJ
Dynatel 573
- Manufacturer: Dynatel
Cable and Fault Locator The Dynatel 573 Cable and Fault Locator is a portable, battery-operated tone set that locates the path of buried or underground (UG) cables. Applications: locating butt slices; slack loops...
$835 USDFarmingdale, NJ
Fluke CIQ-100
- Manufacturer: Fluke
- Model: CIQ100
CableIQ finds common cable faults and data rate. Cables often fail in harsh industrial environments where cables are exposed to vibration, extreme flexing, moisture, expansion and contraction from temperature cha...
Farmingdale, NJ
Dynatel 573P
- Manufacturer: Dynatel
Cable and Fault Locator The Dynatel 573 Cable and Fault Locator is a portable, battery-operated tone set that locates the path of buried or underground (UG) cables. Applications: locating butt slices; slack loops...
$835 USDFarmingdale, NJ
Dynatel 4420L
- Manufacturer: Dynatel
Cable Fault Locator and Wand Cal: Calibration Available | As-is: Unit Sold AS-IS
$1,045 USDFarmingdale, NJ
Tektronix 2651A-KIT-3^
- Manufacturer: Tektronix
The Model 2651A-KIT is a high-current, low-impedance coaxial cable assembly that is used to connect the Model 2651A High Power System SourceMeter Instrument to the Model 8010 High Power Device Test Fixture. It al...
$1,033 USDFarmingdale, NJ
Tektronix SHV-CA-553-1^
- Manufacturer: Tektronix
The SHV-CA-553-1 is a high-voltage triaxial cable assembly. This cable assembly is terminated on one end with a male safe high-voltage (SHV) connector. The other end is terminated with a male high-voltage (HV) tr...
$840 USDFarmingdale, NJ
$995 USDFarmingdale, NJ
Tektronix 2107-50^
- Manufacturer: Tektronix
The Model 2107 Low-Thermal Input Cables with Spade Lugs are input cable assemblies for the Model 2182 Nanovoltmeter. The assemblies are terminated with a two-channel LEMO connector on one end and four copper spad...
$531 USDFarmingdale, NJ
Tektronix SHV-CA-553-3^
- Manufacturer: Tektronix
The SHV-CA-553-3 is a high-voltage triaxial cable assembly. This cable assembly is terminated on one end with a male safe high-voltage (SHV) connector. The other end is terminated with a male high-voltage (HV) tr...
$995 USDFarmingdale, NJ
Tektronix SHV-CA-553-2^
- Manufacturer: Tektronix
The SHV-CA-553-2 is a high-voltage triaxial cable assembly. This cable assembly is terminated on one end with a male safe high-voltage (SHV) connector. The other end is terminated with a male high-voltage (HV) tr...
$915 USDFarmingdale, NJ
Tektronix HV-CA-571-3^
- Manufacturer: Tektronix
The Model HV-CA-571-3 is a 3.1 m (10 ft.) long triaxial cable that is terminated with a high-voltage triaxial panel-mount connector on one end. The other end is unterminated. The cable is intended for use in a sa...
$767 USDFarmingdale, NJ
Lauterbach LA-7729
- Manufacturer: Lauterbach
Debug-MPC8260 Cable Cal: Calibration Available | As-is: Unit Sold AS-IS
$737 USDFarmingdale, NJ
Tektronix 3732-MTC-3^
- Manufacturer: Tektronix
The Model 3732-MTC-1.5 / 3.0 cable is a 78-pin cable assembly is 1.5 m (5 ft.) or 3.0 m (10 ft.) in length and terminated with a male D-sub connector on one end and a female D-sub connector on the other end. 8-pi...
$559 USDFarmingdale, NJ
Tektronix 2651A-KIT-2^
- Manufacturer: Tektronix
The Model 2651A-KIT is a high-current, low-impedance coaxial cable assembly that is used to connect the Model 2651A High Power System SourceMeter Instrument to the Model 8010 High Power Device Test Fixture. It al...
$788 USDFarmingdale, NJ
Fluke CIQ100 Cable Tester
- Manufacturer: Fluke
- Model: CIQ100
Good condition Fluke CIQ100 Cable Testers. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword