Used Bar Feeders/Loaders in Canada

2008 IEMCA MASTER 880 MP BAR FEEDER

• Manufacturer: Iemca
• Model: Master 880

2008 Iemca Master 880/14 MP Single Rack Magazine Automatic Bar Feeder, CNC Positioning, Clutch-Free Torque Control, Double Bar-Pusher System, Handheld Controller *Like new, rarely used. **Purchased new for USD$62k

CNC ENHANCEMENTS AUTOBAR-400 MAGAZINE TYPE BAR FEEDER

• Manufacturer: CNC ENHANCEMENTS

CNC ENHANCEMENTS AUTOBAR AB-400 MAGAZINE TYPE BAR FEEDER. BAR DIAMETER CAPACITY .25" - 4.0", MAX BAR LENGTH 60", ADJUSTABLE BAR HEIGHT: 28"-58", AIR REQUIREMENT 80 PSI.

CNC ENHANCEMENTS AUTOBAR-400

• Manufacturer: CNC ENHANCEMENTS

THE CNC ENHANCEMENTS AUTOBAR-400, A MAGAZINE-TYPE BAR FEEDER, IS DESIGNED FOR AUTOMATED BAR LOADING OPERATIONS. THIS MACHINE ACCOMMODATES A BAR DIAMETER CAPACITY RANGING FROM .25 INCHES TO 4.0 INCHES, WITH A MAXI...

SPEGO 126-12S

• Manufacturer: Spego

Spego 126-12S Bar Feeder, Guide Holes Equipped with: (6) guide holes | Capacity: 0.75 in | Max bar length: 12.0 ft | Made in: United States

LNS QL SERVO S3

• Manufacturer: LNS
• Model: QL Servo S3

LNS QL Servo S3 Quick-Load Automatic Bar Feeder, Remote Control Station, Magazine Table

Bar Feeder

Bar Feeder. Capacity- about 4 inch diam. (To be verified. ) 2 chucks. Hydraulic

UNIVERSAL AUTOMATIC AS

• Manufacturer: UNIVERSAL AUTOMATIC

Equipped With FEATURES: 17" Vibratory Bowl Feeder Air Clamping Coolant Pump and Tank

2005 JERN YAO JBF-19B5S

• Manufacturer: JERN YAO

Equipped With * Oil Centrifuge * New exit conveyor * Wire turntable

1982 NAKASHIMADA PF-1080

• Manufacturer: Nakashimada

Equipped With Double Knife Shearing Method Fingerless Transfer System Positive Knockout -Second & Third Punches Knock out relief device Positive Interlocked lub system on all critical areas Eddy-Current variable ...

NUTAP UNT 20

• Manufacturer: Nutap

Equipped With * Tapping, Boring & Counter-boring of Special Nuts * Specially Suited to Thread Blind Borings & Extremely Long Parts * PLC Control & Process Tap Monitoring * Full Electronically Control of Indexing ...

1987 NAKASHIMADA PF-420

• Manufacturer: Nakashimada
• Model: PF-420

Equipped With * Fingerless transfer Maximum cut-off diameter: 4mm (.158") | Maximum cut-off length: 25mm (1.00") | 1st die knockout stroke: 50mm (2.00") | 2nd die knockout stroke: 20mm (.788") | Output: 80, 100, ...

HYODONG 36mm

• Manufacturer: HYODONG

Equipped With Specifications: Features: MACHINE FEATURES/TECHNOLOGY OPTIONS: 1) Built-in Robot tool change system A built-in tool change system for quick die change with better compact design. The die block and p...

2008 LIAN SHYANG LS-C-NF-24B6S

• Manufacturer: LIAN SHYANG

Equipped With *PKO Number of dies: 6 | Forging stations: 6 | Max. cut-off dia: 24mm | Max cut-off length: 30mm | Max. kick out length: 35mm | Products (nut): M12-M16 | Dies pitch: 100mm | Ram stroke: 110mm | Forg...

LNS MODEL QLS 80 S2 BARFEED -2022 ( 2 available)

• Manufacturer: LNS

Bar Diameter Capacity: 1/4" - 3-1/8" Maximum Bar Length Capacity: 63" - not to exceed overall length of spindle Minimum Bar Length Capacity: 14" Control Voltage: Electrical control cabinet, including auto-tran...