Used Granulators & Pelletizers in Illinois, USA

NELMOR G1012LS LOW SPEED GRANULATOR 16580

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 8710-26404. 10″ x 12″ feed throat. 5 knife solid rotor, 2 bed knife. 3HP 230/460V. SEW-Eurodrive motor and gearbox. Chain and sprocket driven rotor. Insulated top ro...

PALLMAN PS6-6 RUBBER GRANULATOR 17877

• Manufacturer: Pallmann

Pallman “Ultra-Granulator model PS6-6, S/N 184.90.022, 22″ x 24.5″ feed throat (560mm x 630mm), 3 knife guillotine style rotor, 2 bed knife, 115 HP (86 Kw) 1780 RPM 440-volt motor with a 140 maximum amp load, rat...

NELMOR G810LS LOW SPEED GRANULATOR 16117

• Manufacturer: Nelmor

Nelmor model G810LS, low speed granulator, S/N 8904-28845. 8″ x 10″ feed throat, chain and sprocket driven 3 knife solid rotor, hard faced cutting chamber, 1HP 230/460V motor with a gearbox. Insulated top robot/h...

MA INDUSTRIES 061995-A209 GRANULATOR 14638

MA Industries model 061995-A209 granulator. S/N N-737-1045. 18″ x 37″ feed throat, 3 knife high shear rotor, 2 bed knife. 100HP 460V motor, tray feed hopper, 10″ bolt flanged airveyor discharge mounted on a 40″ d...

SPROUT-BAUER DSF1512 FILM GRANULATOR 12439

Sprout-Bauer model DSFf1512 film granulator. No S/N. 12″ x 15″ feed throat 7 knife open rotor, 2 bed knife, 20HP 230/460V motor. Insulated tray feed hopper with 10″ OD top blow in, 4″ right hand airveyor discharg...

CUMBERLAND 5UC GRANULATOR / AIR-TABLE 16594

• Manufacturer: Cumberland

Cumberland model 5UC granulator with air table system. S/N none. 14″ x 20″ feed throat, 3 knife open rotor, 2 bed knife, 15HP 460V motor. 6075FD, 7.5HP blower with 7″ inlet and 6″ outlet. Airtable blower is 5003F...

GETECHA SRS100 A2 LAB GRANULATOR 12432

• Manufacturer: Getecha

Getecha model SRS100 A2 laboratory granulator, S/N 15339.6. 60mm x 80mm (2.362″ x 3.149″) feed throat, 100mm (3.937″) cutting diameter and length 4.5mm round and angled perforation screen. 220 RPM rotor speed pow...

MODITEC G-PLUS 2 GRANULATOR 16488

Moditec model Goliath G-Plus2 granulator. S/N 7033. 10.5″ x 9″ cutting chamber, two 9.5″ OD cutters, three rollers on screenless design, chain driven cutters via 0.9 kW, 208-230/460V motor. Wired for 240V. Top ha...

PALLMAN 4-7.5 RUBBER GRANULATOR 18882

• Manufacturer: Pallmann

Pallman “Ultra-Granulator” type PS, series C knife mill. Model 4-7.5. 20″ x 29.5″ feed throat entrance (510 mm x 750 mm). 400 mm diameter guillotine style rotor with three (3) rotating knives and two (2) fixed be...

IMS 6″ X 8″ GRANULATOR 4992

IMS 68 granulator 6″ x 8″ feed throat, 3HP motor. Mounted on casters.Price: $750.00, as is, where is.

PTI CPF-1000S PELLETIZER CUTTING HEAD 18010

One (1) used PTI model CPF-1000S water ring cutting assembly. S/N 2911. Includes 40 hole die, 3 HP cutter motor, stand, water ring, and sluice way. All wiring run to junction box with disconnect

CUMBERLAND 18 x 37 GRANULATOR 12541

• Manufacturer: Cumberland

Cumberland model 1837-5KN granulator. S/N 50510-84013. 18″ x 37″ feed throat, 5 knife steep angle step adjustable rotor knives (10 segments), 2 bed knife. Designed for film granulation. Belt driven by a 100 HP 46...

BALL & JEWEL LT-1248 GRANULATOR 12251

• Manufacturer: Ball & Jewell

Ball & Jewel model LT-1248 granulator. S/N 37298. 12″ x 48″ feed throat, 3 knife open rotor, 2 bed knife, dual 10HP 230/460V 1,170 RPM motors. Dual flywheel hydraulically operated insulated front sheet feed hoppe...

ANDRITZ SPROUT-BAUER DSF1518 GRANULATOR 12549

• Manufacturer: Andritz

Andritz Sprout-Bauer model DSF1518 granulator. S/N 2000-00373. 7 knife rotor, 2 bed knife, 30HP 460V only motor. Belt driven 5″ x 18″ blow-in in-feed hopper, vacuum take off discharge. Mounted on a short leg base...

REBUILT CONAIR HD-2028 GRANULATOR 18784

• Manufacturer: Conair

Conair model HD-2028 granulator. S/N 71438. 20″ x 28″ feed throat. 3 knife high shear open rotor with two bed knives. 50 HP 230/460-volt motor. Conveyor style in-feed hopper with an in-feed height of 81.5″. 6″ OD...