Used Granulators & Pelletizers in Illinois, USA

CUMBERLAND 1524B GRANULATOR 18793

• Manufacturer: Cumberland

Cumberland model 1524B granulator. S/N 58500-802. 15″ x 24″ cutting chamber. 3 knife steep angle rotor with 2 bed knives. 40 HP 230/460-volt 1775 RPM motor. Top feed box hopper with blow in. 6″ OD airveyor discha...

CUMBERLAND 484 GRANULATOR 16509

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 521000-792. 14″ x 16″ feed throat, 3 knife twin shear rotor, 2 bed knife, 20HP 230/460V motor. Insulated tray feed hopper with 4″ ID left hand pipe chute. Gravity discharge on...

RAPID 2442RS HOG GRANULATOR 18894

Rapid model 2442RS hog granulator. S/N 85.324. 24″ x 24″ feed throat. Belt driven 20 knife hog rotor with 24mm bolt size knives. 3 bed knives. 100 HP 230/460-volt 1760 RPM motor motor. Dual flywheels. 8″ OD airve...

CUMBERLAND 8″ 24 KNIFE PELLETIZER 18344

• Manufacturer: Cumberland

One (1) used Cumberland 8″ strand pelletizer. Twenty-four knife solid helical rotor. 10 HP A/C motor with Mitsubishi model A200 inverter. S/N 64050-B-727-6446.

CONAIR 304 20 KNIFE PELLETIZER 18118

• Manufacturer: Conair

One (1) Used Conair Jetro Model 304 Strand Pelletizer. S/N 98778. 4″ wide 20 knife helical rotor, driven by 2 HP D/C motor. 10 amps maximum load, includes drive and controls. 230/1/60 input power. Missing rotor.

SCHEER BAY SGS100-E PELLETIZER 17692

• Manufacturer: Scheer

Used 4″ wide Scheer Bay pelletizer Model SGS100-E. S/N SE10CC-9801, 460 volt A/C input, 3 phase, 60 hertz, 14.2 amps. Has 32 knife carbide inlay helical style rotor driven by an AC Tech variable speed controller....

CUMBERLAND 5018H HOG GRANULATOR 18728

• Manufacturer: Cumberland

Cumberland model 50180H hog granulator. S/N 551000-84002. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. Pelican style in-feed hopper. 160mm rotor bearings with a...

PTI WATER RING PELLETIZING LINE 18007

One (1) used 1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42″ center-line height. The gearbox i...

RAPID 2442RS HOG GRANULATOR 18808

Used Rapid model 2442RS hog granulator. S/N 85.859, 24″ x 42″ feed throat. 20 knife hog rotor. 3 bed knives. Dual flywheels. Conveyor in-feed hopper with pneumatic tilt back assist. Hopper conveyor in-feed is clo...

BALL & JEWEL CGMB2045 GRANULATOR 18778

• Manufacturer: Ball & Jewell

Ball & Jewel model CGMB2045 granulator (Nelmor G2045MB). S/N 05L06403. 20″ x 45″ feed throat. Tangential cutting chamber. 3 knife open rotor with 2 bed knives. Insulated conveyor feed hopper and body panels. 8″ O...

CONDUX CS500/1000 GRANULATOR 1725

• Manufacturer: Condux

Condux model CS500/1000-III granulator, S/N 44. Approximately 20″ x 40″, 6 knife fly, beam support rotor, 2 bed knife, 24″ base. No starter and no hydraulics.Price: $15,000.00, as is, where is.

CUMBERLAND 484 GRANULATOR WITH FEED 18635

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 421000-92513. 14″ x 16″ feed throat. 3 knife slant cut rotor, 2 bed knife. 15 HP 460-volt motor. Front feed roll in-feed only. Polynetics 15″ wide steel grooved feed rolls are...

CUMBERLAND 8″ PELLETIZER ROTOR 24 8429

• Manufacturer: Cumberland

Cumberland 8″ pelletizer rotor 24 tooth solid rotor helical cutter. Ceco part number 64743.

NELMOR G1215P1 GRANULATOR WITH FEED 16280

• Manufacturer: Nelmor

Nelmor model G1215P1 granulator. S/N 99K03325. 12″ x 15″ feed throat, 3 knife open rotor, 2 bed knife 15HP 208-230/460V 1,480 RPM motor. Double wall rear top hand feed with front mounted knurled steel feed rolls,...

CUMBERLAND 1420 GRANULATOR FOR AIR 14752

• Manufacturer: Cumberland

Cumberland model 1420 granulator for air table. 3 knife rotor, 2 bed knife. Evacuated by a 7075FD blower with 7″ OD inlet and 6″ OD outlet. Insulated in-feed box, all mounted on a unitized caster frame base.