Used Processing in New Jersey, USA

Mixer-Ribbon & Paddle 8.5 m3 (300 ft3) Carbon Steel - IPP# 203129

Jacketed, Carbon steel body and Jacket, 316 SS Clad internal(contact) Single Ribbon Mixer. with CS jacket. Packing glands on shaft, Chain drive with by approximately 30 HP motor and reducer.

Mixer-Ribbon & Paddle 0.42 m3 (15 ft3) Stainless Steel 316 - IPP# 107553

• Manufacturer: Koppers

Unit has twin 2 1/2" diameter shafts with adjustable paddles. Packing glands on shafts. Has 2-section bolt on cover with 10" x 10" feed port, 12" x 16" with loose cover. 26" x 18" bottom discharge. 5 HP, 3/60/230...

Mixer-Ribbon & Paddle 0.1 m3 (3.5 ft3) Stainless Steel 316 - IPP# 704157

• Manufacturer: Babcock & Wilcox

"L" Series ribbon blender Features: hinged lid, removable endplate, interrupted ribbon, external bearings, packing glands 220/250/380/440 volt 69.3 rpm Unit with a built-in on/off switch. Openings: inlet 18" x 9"...

Mixer-Ribbon & Paddle 0.5 m3 (17.7 ft3) Stainless Steel 316 - IPP# 701967

• Manufacturer: Babcock & Wilcox

paddle mixer 36 rpm. paddle speed.Packed glands. Unit has bottom discharge with manual valve.

Stainless Steel 304 Loedige Littleford Ploughshare KM8000 Mixer-Ribbon & Paddle - IPP# 213607

• Manufacturer: Littleford

continuous mixing 25,000 kg/hr 8000 liter(2113 gallon) total capacity with (2) side hatches with hinged covers and hand wheel swing bolts, (1) 16" x 24" ID top drive end charge port, (1) 16" ID vent port top cent...

Stainless Steel 321 SCHICHAU-GRIEP DS 160 Mixer-Ribbon & Paddle - IPP# 208406

• Manufacturer: SCHICHAU-GRIEP

ribbon mixers with cylindircal housing, ribbon agitator stuffing box weight motor 660 kg, inlet and outlet filters

Stainless Steel 304 Vrieco Nauta 150RB-5 Mixer-Nauta - IPP# 205955

• Manufacturer: Nauta

Vrieco Nauta orbital screw mixer 15 PSIG @ 275 degrees F internal ASME Code stamped Internals have a 180 grit polished finish. All Welds ground smooth, and screw is also polished with a 180 grit finish With 30HP ...

Mixer-Nauta 8,000 L (2,113 gallons) Stainless Steel 316 - IPP# 211836

• Manufacturer: Nauta

order #M-16668, bolt flat top, screw and orbital arm both driven from the top, orbital arm driven by 2.2 kw, 3/50/220/380 volt, 1450 rpm motor 316 s/steel (1.4401) screw 350mm diameter x 4526mm long, 270mm screw ...

Mixer-Nauta 10,000 L (2,642 gallons) Stainless Steel 316 - IPP# 705252

• Manufacturer: Nauta

truncated cone mixer 3080mm top diameter x 2440mm high cone section with 1800mm diameter truncated cone bottom Max speed 20 rpm 316 stainless steel twin helical agitator on single shaft. serial #21084086/1 20-710...

Mixer-Nauta 6,000 L (1,585 gallons) Stainless Steel 316 - IPP# 211835

• Manufacturer: Nauta

order #16667 high conical section bolt flat top, screw and rotating orbital arm both driven from the top orbital arm driven by 1.5kw, 3/50/220/380 volt, 1420 rpm motor via 50 rpm reduction gearbox screw 350mm dia...

Mixer-Muller 7.5 kW (10 HP) Stainless Steel 304 - IPP# 93993

• Manufacturer: Muller

12" high hood w/(2) 24" x 10" doors w/swing bolts Unit has btm and side scraper blade. 8" x 8" btm discharge.

Stainless Steel 304 Jaygo DISHO-V-120-85 Mixer-Intensive - IPP# 108682

• Manufacturer: Jaygo

Jaygo vacuum dispersion and homogenizing mixer system Mixing chamber rated 20 psi and full vacuum @ 350 degree F to -20 degree F minimum. All fittings sanitary. Unit measures 20" diameter x 20" straight side x 8"...

Mixer-Intensive 780 L (206.1 gallons) Stainless Steel 304 - IPP# 49709

• Manufacturer: Plastechnik Greiz

750/2000 liter fluidizing intensive mixer/cooler system Mixer Mdl 750-4 cooler mixer Mdl 2000-2 Mixer/heater is 780 liter total capacity, 600 liter working capacity. Shell 1.0m dia. Load 235 Kg. W/200mm discharge...

Mixer-Intensive 155 L (40.9 gallons) - IPP# 48860

• Manufacturer: VEB Keramikmaschinen, Gorlitz

intensive mixer bowl. 23" dia x 23" str side. Driven by varispeed drive, 40 HP to 1 HP (31.3 KW to 1 KW), 1565 to 50 rpm, 440 to 45 volts. W/spare motor.

Mixer-Intensive 37.9 L (10 gallons) Stainless Steel 316 - IPP# 102453

• Manufacturer: Gunther Papenmeier

high intensity mixer Has 3-blade propellor type mixer. Vert mixing chamber 14" dia x 16" deep. Has manual plow. Manual plow valve on 4" outlet. variable speed motor 530 rpm min W/controls and timers.