New & Used Agitators, Blenders, Mixers in Hiroshima, Japan

Ribbon Blender
Main motor 11Kw, discharge motor 0.75Kw (reduction ratio 1/29) Capacity approx. 1500L
Hiroshima, Japan
Ribbon Blender
Total capacity 735 L Blade rotation 3–30 rpm (reduction ratio 1/240). With jacket (steam usage pressure 1.5 kg/cm2)
Hiroshima, Japan
Ribbon Blender
Tank dimensions: L1500, W900, H560. *The tank is a loose V-shape and the capacity is unknown. External dimensions: L2600, W900, H1250. Is the outlet for liquid use (there is a stand for the pump)?
Hiroshima, Japan
SUS tank with agitator
250L φ710×H640(Body)×H750(Leg) Remarks: Ancillary product for 6931 Pressure Cake Mixer
Hiroshima, Japan
［Satake] Agitator Model No
- Manufacturer: サタケ
Shaft and blade material: SUS. Three propellers x 1. Rotation speed: 360 rpm. Base with casters/manual elevation type.
Hiroshima, Japan
Ribbon Blender 4000L
Total capacity: 4000L Discharge: Bottom slide damper With SS jacket Main unit only, without board
Hiroshima, Japan
[Kajiwara] Paddle Mixer
- Manufacturer: カジワラ
Capacity about 700L With jacket Purchasing area: 60Hz | Material: Wetted part SUS304 | Quantity saved: １
Hiroshima, Japan
［Ikeda Rika] V type mixer No model
- Manufacturer: 池田理化
Capacity: about 10L With agitator Power: 0.2kw/100V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
［Mitsui Miike (now Nippon Coke)] Cooler mixer No model
- Manufacturer: 三井三池（現：日本コークス）
1000L Remarks. If serviced. It will be clean, please don't worry.
Hiroshima, Japan
［Special Kikka] Homo-Mixer Model No
- Manufacturer: Daiichi Bussan Co.
500 to 2000rpm Power: 200ｗ/100V | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Meiwa Industry OM-130
- Manufacturer: 明和工業
Total capacity 130L. Cage rotation speed 11/13rpm(50Hz/60Hz). 1.5Kw200V. Vessel rotation speed 22/26rpm (50Hz/60Hz). 0.4Kw 200V. The mixing layer rotates both vertically and horizontally to increase mixing power.
Hiroshima, Japan
2007 Buhler SDV 1100
- Manufacturer: ビューラー
Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...
Hiroshima, Japan
1990 Hosokawa Micron DBX-1000RMW
- Manufacturer: ホソカワミクロン
Mixing capacity 1000L Motor: 3.7Kw for rotation (explosion-proof) / 0.4Kw for revolution (explosion-proof) Rotation speed: 55RPM for rotation/ 1.6RPM for revolution Design withstand pressure: FV Jacket: 1.9Kg/cm²...
Hiroshima, Japan
Aikosha Manufacturing AM-90
- Manufacturer: 愛工舎製作所
With ON/OFF switch & timer. Spare blades available.
Hiroshima, Japan
Kawata SFC-50
- Manufacturer: カワタ
High-precision mixing by three-dimensional motion (vibration + agitation) Remarks Blades: missing.
Hiroshima, Japan