Used Processing in Japan

Large machinery industry DSS-45-L

• Manufacturer: Large machine industry

Screen mesh size: 1mm Triple-layer drum structure (each screen is independent) Suitable for liquid products.

GL reactor 100L

Capacity: 100L Jacketed and agitated *The insulation is currently being removed to confirm the nameplate. The nameplate and documentation were not found, so details are unknown.

Chuo Kakoki VU-60

• Manufacturer: 中央化工機

Total Capacity: 125L (Actual Capacity: 30L) Jacket Pressure: 1.9kg/cm2G Frequency: 1800

Kansai Chemical Machinery Manufacturing 3000L

• Manufacturer: 関西化学機械製作

Capacity: 3000L Design Pressure: Body F.V., Jacket 0.2MPa Design Temperature: Body 95°C, Jacket 132°C Type 2 Pressure Vessel Documentation Available

SEC FK-22-10

• Manufacturer: エスイーシー

Cubic type Heat transfer area: 1.53m2 Design pressure: 2kg/cm2G

Ikebukuro Horo Kogyo 2000L

• Manufacturer: 池袋琺瑯工業

Capacity: 2000L Design Pressure: Main Unit F.V. ~0.294 MPaG, Jacket 0.39 MPaG Outline drawing available

Multitubular heat exchanger

Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One

1998 [Daiko Kakoki] Conical Dryer 1000L

• Manufacturer: 大興化工機

Can body 1200φ×1837 Design pressure: FV vacuum inside can ~3Kg / Jacket 3kg

Dalton DV-1-100

• Manufacturer: Dalton

Total capacity: 220L with butterfly valve Power: 0.75KW | Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: 1 unit

2000 Kohken Powtech FS-J01-S

• Manufacturer: 粉研パウテック

Capacity: 20Kg/h max. ⇓Test run video⇓. Power: 0.4Kw200V | Quantity saved: 1

2007 Buhler SDV 1100

• Manufacturer: ビューラー

Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...

2006 uzax 1050l

• Manufacturer: yooxax

Material: SS | Quantity saved: One

2006 Veolia CMF12

• Manufacturer: ヴェオリア

PP hollow fiber membrane module (1.5m2 x 12 modules) ＜Basic design Leachate (after pretreatment, PH 6-9, water temperature 2-35°C, turbidity ava < 30°C) in continuous operation for 24 hours (backwash interval 60 ...

1999 Mitsubishi Kakoki SJ-50F

• Manufacturer: Mitsubishi Kako Corporation

6500 rpm, 5520 L/h, explosion-proof specification Previous experience: refining fuel oil (C fuel oil) We only have enough for one set of disassembling tools, so the remaining two units will be purchased or manufa...

Magellan PT-60

• Manufacturer: Mazellar

Mixing volume: 60 L Remarks Catalog Power: 0.2kw | Material: Main section SUS | Quantity saved: One

Toshiba IS850 Injection Molding

• Manufacturer: Toshiba
• Model: IS850

Good condition Toshiba IS850 Injection Moldings manufactured in 2003. Located in China and other countries. Click request price for more information.