Used Processing in Thuringia, Germany

1998 Agitator

• Manufacturer: Grob AG

Agitator The agitator blades have a diameter of approx. 92cm. It is approx. 84cm long. The frame with the motor is 110cm long and 23cm wide. The bridge is 22cm high, total height including motor cover is approx. ...

RIEDEL Cooling Unit

Type: SC71.2M4LE.1; Refrigerant: R134a; Filling weight 1.85kg; Rated Voltage: 400V; for more details see photo of the nameplate;

FRYKA KBT 08-51 Mini Deep Freezer

• Manufacturer: Fryka

Serial number: 70225-09-22 , temperature range 50-30 degrees , container capacity approx. 8L , for more details see photos of the nameplate

NORDSON E4-EUR Dosing Device

• Manufacturer: Nordson

Serial No.: 140001203132018; 320 watts; equipped with hand-held control unit; for more details see photos;

Slotted casting machine (slotted casting machine) nRad Kummer GmbH

• Manufacturer: Kummer GmbH

A touchscreen operator interface for basic operation; PC-based software is used for process recipe creation and editing. Recipes are transferred to the nRad via network connection. nRad Porous Ceramic Chuck (50m...

Technopool Stainless steel bar belt

• Manufacturer: Technopool

Replacement belt for Technopool cooling coil Stainless steel bar belt for Technopool spiral coolers Length (linear meters): approx. 260 - 280 Total width: 900 mm Working width: 760 mm Distance between bars: 30 mm

2007 Espera ESV 03

• Manufacturer: Espera

Line combiner Microprocessor-controlled line combiner for automatically combining multiple packs emerging from a packaging machine. - Adjustable pack length up to 550 mm pull-off length - Number of lines selectab...

Mixed feed line

• Manufacturer: Bühler, Jensen, Loose

Mixed feed line Mixed feed line, consisting of the following components: - Bühler hammer mill - Bühler feed cube press / pelleting press, type DPAB - Loos high-speed steam generator, type DF, built in 2000 - Scal...

Antonio Mengibar 90º curves, bands

• Manufacturer: Antonio Mengibar

Puck return circuit Puck = transport form / carrier - 8 meter conveyor belt - 2 x 90º curves - 2 x conveyor sections of approx. 1 m each - 1 x CV motorization

GROBA 570 x 54 cm

• Manufacturer: Groba

ascending conveyor Length: 570 cm | Height: 290 cm | Wide corrugated edge outside: 54 cm | Wide corrugated edge inside: 48 cm | Edge height: 3,5 cm

Alfa laval / Thermofin M10-BWREF / TBN N-12-036-070

• Manufacturer: Alfa-Laval
• Model: M10

Recirculating air cooling unit The heating registers were built in 2005 (Alfa laval M10-BWREF). The cooling registers (Thermofin TBN N-12-036-070 heat exchanger) were built in 2019. A heating register and a cooli...

1997 Röscherwerke GmbH VM-19/S

• Manufacturer: Röscherwerke GmbH

Vacuum sealing machine