Machine Tools » Rolling Mills (metalworking) » Sweden

Building Filters

15

Used machine tools in Sweden

Trusted Seller
Auction
Round bending machine Metallkraft RBM1550-10
- used
- Manufacturer: Metallkraft
- Model: RBM1550-10
Year according to: Type plate | User manual: Yes, included | Length (m): 600 | Width (m): 2300
Sundsvall, Sweden
Visit Auction Website
2009 Roundo PAS 550x3000 wCNC² 180402
- used
- Manufacturer: Roundo
- Model: PAS-550
Top support up to ø6,5m Side support wCNC² infeed table with hydraulic sidemovement of the plate.
Värnamo, Sweden
2002 Roundo PAS500x4200 180375
- used
- Manufacturer: Roundo
- Model: PAS
Top support Side support Hardened Rolls DRO Top condition
Värnamo, Sweden
Trusted Seller
2020 Metallkraft RBM 1270-25E
- used
- Manufacturer: Metallkraft
- Model: RBM1270-25E
The upper & lower roller is profiled with 30 mm pitch (between the peaks) and profile depth of ~5 mm. Used for correction and round bending of sheet metal. The rear bending roll is not profiled. This information ...
Gnosjö, Sweden
Luna motorized round roller
- used
- Manufacturer: Luna
Article number: 118679 | Capacity: 3mm | Upper roll diameter: 100mm | Side roller diameter: 110mm | Working length: 1050mm
Hässleholm, Sweden
ROUNDO ROUND ROLLER PAS 550×4000
- used
- Manufacturer: Roundo
- Model: PAS-550
Article number: 117987 | Control system: Roundo WCNC2 | Capacity: 4000x30mm | Upper roll diameter: 550mm | Pre-bending capacity: 30mm | Working length: 4000mm | Top support: 1,285 – 4,335mm | Voltage: 380v / 94k...
Hässleholm, Sweden
Roundo ring roller R3
- used
- Manufacturer: Roundo
– Standard rollers – Steel tube rollers 3 grooves 27mm 35mm 42mm – Nylon tube rollers 2 grooves 37mm 44mm – Nylon tube rollers 1 groove 60mm
Hässleholm, Sweden
Roundo ring roller r-6-s
- used
- Manufacturer: Roundo
– Digital display of side rollers – Stepless speed
Hässleholm, Sweden
Göteneds Round Roller 1000
- used
Article number: 118617
Hässleholm, Sweden
Trusted Seller
Auction
Lift to roof tile pallet
- used
Type plate: missing | Width (mm): 60cm | Height (mm): 182cm | Depth (mm): 58cm
Älvdalen, Sweden
Visit Auction Website
2009 Roundo PAS 550x3000 wCNC²
- used
- Manufacturer: Roundo
- Model: PAS-550
Pre-bending full length: 40mm | Bending capacity ø1.65m full width: 45mm | Bending capacity ø1.65m width1.5m: 56mm | Bending capacity ø>3.5m full width: 52mm | Bending capacity ø>3.5m width 1.5m: 65mm | Working ...
Värnamo, Sweden
2002 Roundo PAS500x4200
- used
- Manufacturer: Roundo
- Model: PAS
Pre-bending: 22mm | Bending capacity ø1.5m full length: 27mm | Bending capacity ø3.5m full width: 33mm | Bending capacity ø>3.5m width 1250mm: 43,5mm | Working length: 4200mm | Over-rolled: 500mm | Side rollers:...
Värnamo, Sweden
1992 Dimeco 1675/BV
- used
- Manufacturer: Dimeco
Plate width: 300mm | Plate thickness full width: 0.6-2.5mm | Number of guide rollers: 7 pcs | Number of feed rollers: 4 pcs | Roll diameter: 60mm | Engine: 1,1kW | Length: 975mm | Width: 775mm | Height: 1460mm |...
Värnamo, Sweden
1996 Dimeco 1675/DVV
- used
- Manufacturer: Dimeco
Target width: 500mm | Plate thickness: 1,6mm | Number of guide rollers: 7 pcs | Number of feed rollers: 4 pcs. | Roll diameter: 60mm | Weight: 1050kg
Värnamo, Sweden
2004 Dimeco 1676/H
- used
- Manufacturer: Dimeco
Plate width: 1300mm | Plate thickness: 1,7mm | Number of feed rollers: 4 pcs. | Number of guide rollers: 7 pcs. | Roll diameter: 80mm | Weight: 2800kg
Värnamo, Sweden