Used Processing in Oregon, USA

Incline Z Style Conveyor Without Hopper

• Manufacturer: Custom Made

n: Sold in As-is, Where-is Condition. Overall dim: 16” L x ” 24” W x 76” H (see layout photos) | Discharge is currently 61”h; belt width: 12”; Cleats 8” W x 3” H

Clemco Industrial Sandblaster

Was in working condition when removed from service, current condition has not been tested. Has been unused for over 20 years.

20" Electric Buffer

Was in working condition when removed from service, current condition untested.

2025 Trinco 36x36/PC Pressure Blast

• Manufacturer: Trinco

Trinco™ Model 36x36/PC Pressure Blast Cabinet with Model 800 PT Cust Collector - 36” Wide x 36” Deep x 36” High Internal Work Area - Dual 28” Wide x 30” High Side Doors - Expanded metal grate over fine mesh stee...

2025 Trinco 36 BP Blast Cabinet

• Manufacturer: Trinco

Equipment Features: Designed for intermittent blasting operations. The Trinco BP Dust Collector vacuums the dust and contamination from the cabinet. Media is recycled from the gun system to the hopper and back t...

10 HP AirPro Blower, Model HPRL217

• Manufacturer: AirPro

10 HP AirPro Blower, Model HPRL217 10 HP AirPro Blower, model HPRL217. Serial number 23513, built 2018

Chester-Jenson 300 gal. Proc.

• Manufacturer: Chester

Item is a used, Chester-Jenson Processor tank. This is a jacket, cone bottom process tank the jacket rating is 100 PSI It is equipped with a center mount Lightnin agitator having two, 3-blade sets. The tank has t...

1989 LEE Industries 300 UDBT

• Manufacturer: LEE Industries

Item is a used, LEE Industries, 300 gallon, jacketed process tank. The tank is cone bottom/dome top with a manway in the top. It is equipped with top mounted 1.5 HP Lightnin agitator having 2 sets of agitator bla...

Used GAI MLE661-Bier-004 filler crowner / Enos T3 Labeler

• Manufacturer: Enos

Now Available - Late model GAI MLE661-BIER-004 triblock rinser filler crowner with Enos T3 pressure sensitive labeler and connecting conveyor. The triblock was manufactured in 2019 and remains in excellent shape ...

Used Sullivan Palatek M-10 Air Compressor with Sullivan Palatek High Temp Air Dryer

• Manufacturer: Sullivan - Palatek

(1) Available - 2021 Sullivan Palatek M-10 compressor - SP M-Series 10hp industrial air compressors are engineered to be a reliable, versatile, energy-efficient, continuous-duty compressed air solution developed ...

Pack Leader Shrink Sleeve labeling machine - model SL10, 2021 and 2m steam tunnel

• Manufacturer: Pack Leader

Item is a used Pack Leader model SL10 shrink sleeve labeler last used with a Twin Monkeys can line to sleeve and assortment of beverage can sizes. the machine was built new in 2021 and remains in excellent condit...

Admix 105RS88S High Shear Mixer

• Manufacturer: Admix

Item is a used Admix Rotosolve, 7 1/2 HP, high shear mixer. It is equipped with a Baldor S/S motor turning at 3520 RPM with 230/460 volt power requirement. It is a flange mount mixer with approximately 42" long s...

(1) Available - Used JV Northwest 170bbl / 5270Gal jacketed/insulated storage tank - HLT

• Manufacturer: JV Northwest

(1) Available - Used JV Northwest 170 bbl / 5270 Gallon jacketed and insulated HLT / storage tank. The tank was previoulsy used a a hot water tank with low pressure steam used to heat the vessel with the included...

(1) Available- Used CPE Cart Mounted Heat Exchanger

• Manufacturer: CPE

(1) Available - Item is a used CPE heat exchanger - Model CPE30H-XXD. This unit is designed with painted end plates and stainless heat transfer plates. The manufcturer describes the unit as follows- "Specificall...

Quincy NW Screw Compressor

• Manufacturer: Quincy

Item is a used, Quincy, 30 HP, MG Series, rotary screw air compressor. This is an air cooled machine set up for 230 volt/3 phase power. Machine was serviced on a regular schedule and is in very good condition. Lo...